3/16" aluminum alloy spool for thermal spray applications. When arc sprayed, aluminum offers superior corrosion protection. This part is primarily used in shoreline and saltwater areas, both spash zone and subsea areas where PH ranges from 8-12. Aluminum coatings can also be used in service with continuous operating temperatures of 1000ยบ F. Recommended spray parameters: 80-100 PSI, 32-34 Volts, 150-650 amps, 6-8" standoff.
| Brand Name | Thermion |
|---|---|
| Product Highlight 2 | Deposit Rate: 18-65 lbs/hr |
| Product Highlight 1 | Bond Strength: 2000+ with 1000 PSI being typical |
| Product Highlight 3 | Wire Coverage: 4 sq ft/lbs at 8-10 mil thick |
| SPEC 1 | 3/16" Aluminum Alloy TSA |
| SPEC 2 | 30lb Spool |
| SPEC 3 | Bond Strength: 2000+ with 1000 PSI being typical |
| SPEC 4 | Deposit Rate: 18-65 lbs/hr |
| SPEC 5 | Deposit Efficiency: 60-70% |
| SPEC 6 | Wire Coverage: 4 sq ft/lbs at 8-10 mil thick |
| SPEC 7 | Surface Finish: Textured |
| SPEC 8 | For Thermal Spray applications |
| COMMON USE 1 | Oil and Gas Pipelines |
| COMMON USE 2 | Transmission Towers |
| COMMON USE 3 | C.U.I. |
| COMMON USE 4 | Breakwater Piles |
| COMMON USE 5 | Holding Tanks |
| COMMON USE 6 | Offshore Oil Platforms |
| COMMON USE 7 | Saltwater Piles |
| COMMON USE 8 | Exhaust Stacks |
| Product Image 1 | https://39680029.fs1.hubspotusercontent-na1.net/hubfs/39680029/products/20THTH601316SO.jpeg |
| DOWNLOAD 1 NAME | Thermion TH601 Aluminum Alloy Spool - Data Sheet |
| DOWNLOAD 1 FILE | https://39680029.fs1.hubspotusercontent-na1.net/hubfs/39680029/Documents/Thermion%20TH601%20Aluminum%20Alloy%20Spool%20-%20Data%20Sheet.pdf |
Write Your Own Review